Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Allen
Gate installation in Allen usually runs between $2,800 and $9,500 for a full driveway gate with automation, and most jobs are installed within two to three weeks of the initial site measure. That’s the honest range, and we’ll give you a written line-item price before a single bolt is ordered. Ironworks Gate Co. has crews in Allen every week. We know the neighborhoods, the clay soil, and the builder-grade gate packages that came with so many of the houses here. Call (903) 627-2906 and a live person answers, day or night.
Why Ironworks Gate Co. Is Allen’s Preferred Gate Installation Company
Allen homeowners don’t want the cheapest bid. They want the gate that will still be square and closing quietly in 2040. That’s why we get so many calls from Twin Creeks, Watters Crossing, and Stacy Ridge. Victor Salinas built Ironworks around the idea that a gate job is only done when the post is plumb, the operator is dialed in, and the homeowner has a written guarantee in hand.
We carry a 90-Day Done Right Promise on every installation. If something isn’t right, we come back and make it right. No paperwork, no arguing. That’s the Keystone Standard, and it applies to every gate we hang in Allen, from a simple pedestrian gate in 75013 to a double swing driveway gate in 75002.
Our technicians are background-checked, uniformed, and trained on nine automation brands, so the operator that goes on your gate is one we actually service, not one we have to call a third party to support. We answer the phone 24 hours a day, seven days a week. When you call with a question about your Allen gate, you get a person who knows gates, not a voicemail tree.
Gate Installation is all we do, and we’ve been doing it for over 42 years. That focus means we stock parts in our DFW shop that generalist contractors have to order and wait on. For Allen customers, that often means a one-visit install instead of two or three.
Our Gate Installation Services in Allen
Swing Gate Installation
Swing gates are the most common driveway gate style in Allen, and the soil here is brutal on them. Blackland Prairie clay heaves and contracts through the year, which means the hinge post has to be set below the active soil line with a properly oversized footing, or the gate will bind within a few seasons. We excavate to the right depth, set and anchor the post, and only then hang the gate. In Twin Creeks and Watters Crossing specifically, we routinely find original hinge posts that have migrated 2 to 4 inches out of plumb within a decade. The gate was never the problem. The footing was.
Sliding Gate Installation
Sliding gates work well on Allen lots where a swing gate would sweep across a sloped driveway or crowd a side entry. A slide gate rides on a track and roller assembly, so it tolerates some soil movement better than a swing gate, but the track bed still needs proper compaction. We install cantilever slide gates for Allen driveways that cross drainage swales, and we run the power conduit in a way that won’t get crushed by the clay movement underneath.
Double Gate Installation
A double gate spans a wider driveway opening, typically 14 feet or more, which is common on Allen’s larger estate-style lots. Each leaf needs its own hinge post, and both posts need to move together or not at all. We install double gates with a paired operator system so both leaves open and close in sequence, and we set both posts in the same pour day so they cure as a matched set. For homeowners adding automation to a builder-installed double manual gate, we check the clearance, the hinge barrel alignment, and whether the original post footings can actually hold an operator’s torque.
Pedestrian Gate Installation
Pedestrian gates on Allen side yards and pool entries get overlooked until they sag or refuse to latch. We install walk gates with self-closing hinges and latch hardware that meets pool code where required. In neighborhoods like Stacy Ridge, where fences and brick walls run property-line to property-line, the walk gate is often the only side access to the backyard, and it needs to open correctly every time, including the day after a freeze.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Allen
We install and service LiftMaster, FAAC, Elite, and Mighty Mule operators, along with five other major brands. That matters in Allen more than most places: many of the builder-installed operators in houses built between 1995 and 2010 were entry-level units with undersized transformers and no surge protection. When those fail, we can usually rebuild the operator on the spot, but if the board is fried, we’ll install a replacement from a brand we actually carry parts for locally. No ordering from a distributor and leaving your driveway open for two weeks.
Common Gate Installation Problems We See in Allen Homes
- Builder-installed operators without proper conduit runs. Allen’s building boom ran on speed, and many original gate power lines were direct-buried without conduit or run through undersized PVC. When those lines short out in wet clay, the only fix is trenching a new run. We do it during installation rather than leaving you with a recurring fault.
- Posts set on shallow concrete pads. In the clay under 75002 and 75013, a 2-foot footing is a temporary suggestion. Shallow pads heave seasonally, pulling the gate frame out of square. We repour to depth and anchor with steel.
- Manual gates added without entrapment protection. If a home was built with a manual iron gate and you add an operator later, UL 325 requires safety photocells and edge protection. Some installers skip this to save a few hundred dollars. We don’t. It’s a safety requirement, not an upgrade.
- Operators with no surge protection. North Texas thunderstorms and grid flicker kill gate boards fast. We install surge suppressors as part of every operator installation in Allen, because the extra forty dollars costs less than a second service call after the next storm.
Pricing for Gate Installation in Allen, TX
A single swing driveway gate with a basic operator for an Allen home typically runs $3,200 to $5,800. A double swing or slide gate with full automation runs $5,500 to $9,500. Pedestrian gates run $1,400 to $3,200 depending on width and hardware. Steel and ornamental iron are the two materials we hang most in this area, and your existing brick columns or stone piers will factor into the number.
What moves the price in Allen: depth of post footings (clay means we dig deeper than the sand-and-limestone crews south of Dallas), the condition of your existing operator wiring, whether we need to trench a new power run, and the gate width. Every quote is line-item. You’ll see the footing depth, the operator model, the conduit run, and the hardware. Agreed before we start. Call (903) 627-2906 for a free, no-pressure estimate at your Allen home.
We Also Serve Cities Near Allen
Our crews live in the North Dallas metro, so Allen is home turf. We also run regular routes through Plano, Sachse, Richardson, and Garland. If you’re on the edge of Allen in a neighborhood that straddles the city line, call and we’ll let you know which day of the week our crew is closest to your side of town.
Serving Allen, TX - Our Local Coverage Area
We’re based in the Allen area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Allen
The problem is the soil, not the gate. Allen sits on Blackland Prairie expansive clay, which shrinks in summer drought and swells after fall and spring rains. If a post is re-set in the same shallow footing with new concrete but no depth correction, the clay will move it again within a season. The fix is excavating to below the active soil line, typically 30 to 36 inches here, and pouring a footing that anchors below the heave zone. Call (903) 627-2906 and we’ll tell you if your posts are set deep enough to hold.
Replace it. Allen’s 2000s-era builder operators are now at the end of their service life, and even a successful board repair usually buys you another couple of years at most. A new LiftMaster or FAAC operator with surge protection and a current safety package will outlast the rest of your gate hardware, and it’ll cost less than two more repair visits. We’ll quote the replacement before we start, so the number is agreed in writing.
Yes, in most Allen homes the manual gate itself can stay. The work is in adding power and entrapment protection. Many builder-era gates have no conduit run and no way to mount a photocell without a new post or bracket. We’ll trench the power line, install the operator, add the safety edges and photocells required by UL 325, and re-hang the gate if the hinges and post are still square. It’s a one-day install in most cases.
Shallow post footings and missing conduit are the two we find most. Watters Crossing and the surrounding west-side subdivisions were built fast during Allen’s growth years, and the gate packages that came with those homes were often set on 2-foot pads with direct-buried wire. The result is a gate that works for a few years, then starts binding and shorting. We replace the footing and the power run together, because fixing one without fixing the other just moves the failure date.
The gate leaf is one solid welded piece. It doesn’t bend on its own. What moves is the post holding it. In Allen’s clay, a shallow-set hinge post leans out under the gate’s weight, and the gate follows it down until it scrapes the driveway. We see this constantly in Twin Creeks, where original posts have drifted 3 inches in ten years. Re-hanging the gate on the same leaning post is a temporary patch. The real repair is extracting the post, excavating the footing, repouring at depth, and re-setting everything square.
Contact Ironworks Gate Co. for Gate Installation in Allen
If you need a new driveway gate, a replacement operator, or a post reset in Allen, call (903) 627-2906. You’ll get a live person, a straight answer, and a free written estimate. We serve all of Allen, including 75002 and 75013, and we’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Allen and the surrounding North Dallas area for over 42 years.