Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Plano
A new driveway gate in Plano typically costs between $2,800 and $9,500 installed, with custom wrought iron double gates running $7,000 to $15,000. Most installations take one to two days on site, and we quote the full price in writing before any steel is cut. If you’re wondering whether your Plano setback, HOA rules, or Blackland Prairie clay will cause trouble, call (903) 627-2906 and we’ll walk you through it.
We’ve worked Plano neighborhoods long enough to know which questions come up before the first hole is dug. Will the HOA flag the picket spacing? Will the clay push the post out of plumb in two years? Will a sliding gate even fit on a 1980s lot where the driveway runs tight to the property line? These aren’t hypotheticals here. They’re the standard conditions. And we plan for them from the first measure.
Why Ironworks Gate Co. Is Plano’s Preferred Gate Installation Company
Ironworks Gate Co. has built its reputation in Plano on one thing: gates that still work right years after the check clears. We’ve replaced operators on Preston Road estates, rebuilt hinges in Willow Bend, and set new posts on the kind of clay that moves everything you put in it, which is why homeowners trust us for Gate Repair in Plano. Homeowners here don’t want a gate that looks good for six months. They want one they never think about again.
Our Plano customers tend to have lived in the same house for twenty or thirty years. They remember the last contractor who cut a corner. That’s why every installation we do carries the 90-Day Done Right Promise in writing. If something isn’t right, we come back and make it right. No paperwork, no arguing. Victor Salinas, our owner, set that standard years ago and it hasn’t moved since.
When you call about gate installation in Plano, a real person answers. Not a voicemail tree, not an answering service. Call at 2 a.m. if you have a question. Call during dinner. Someone picks up, every time. That matters when a gate has jammed halfway open and two cars are trapped in the driveway.
Our Gate Installation Services in Plano
We’re the dedicated gate specialist for Plano homeowners, and Gate Installation work is what our crews do every day. Here’s what that covers in your neighborhood.
Driveway Gate Installation
Driveway gates in Plano are usually ornamental wrought iron on a steel frame, built to survive Texas sun and the occasional distracted driver. We work with standard widths from 10 to 24 feet, and we handle the concrete work, post setting, Gate Parts & Welding in Plano, and operator installation as one job. In west Plano neighborhoods off Preston Road, most jobs also need a powder-coat finish matched to the existing fence or HOA spec.
Pedestrian Gate Installation
A separate walk gate keeps people from ducking under the driveway gate or waiting for it to cycle. In Plano, where a lot of lots back to greenbelts and walking trails, this gate usually needs a self-closing hinge and a latch that meets local code. We install pedestrian gates that match the driveway gate exactly, down to the picket profile and finial style, so the whole entrance reads as one piece.
Sliding Gate Installation
Sliding gates make sense on Plano lots where a swing gate won’t clear the grade or would block the sidewalk while opening. They need level track, proper rack and pinion alignment, and enough side run for the full leaf. Plenty of Plano homes on the east side have the room for this; some tighter lots off Legacy don’t, and we’ll tell you that before you spend a dollar on hardware. We quote sliding gate installation with the operator, track, and safety edges included.
Swing Gate Installation
Swing gates are the classic Plano look, but they fail early when the hinge post isn’t footed deep enough. We set posts below the clay’s active zone when we can, and we size the hinges for the full gate weight plus wind load. For double swing gates on wide driveways, we install center stops, sequenced operators, and a photo-eye or loop detector so the gates never meet a car halfway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plano
Our crews are trained and equipped on nine gate-automation brands, and in Plano we see a lot of original LiftMaster and Elite operators from the 1980s and 1990s that are finally giving out. When we install a new operator, we match it to your existing gate and your preferred Plano Gate Access Control setup. We stock common parts and boards for LiftMaster, FAAC, and BFT locally, which means we aren’t waiting on a warehouse in another state when your gate is down on a Friday afternoon. If you already have a brand you trust, we’ll quote it. If you don’t, we’ll recommend what holds up on Plano’s heat and clay, not whatever has the best margin.
Common Gate Installation Problems We See in Plano Homes
Here’s what actually goes wrong here, based on years of service calls across Plano:
- Hinge posts heaving out of plumb. Blackland Prairie clay swells after spring rain and shrinks in August drought. A post set in a shallow footing moves with it. The gate sags, the operator torques, and within a year you’re calling us to re-square something that was never right to begin with.
- Sliding gates binding on short setbacks. A sliding gate needs the full leaf length plus the rack travel on one side. Some 1980s Plano lots have the driveway tight to the fence line, and the original installer didn’t leave room. The gate binds halfway open and the motor burns out trying to push it.
- HOA violation notices on mismatched panels. Willow Bend and several other Plano HOA communities specify exact picket spacing, finial style, and powder-coat color. Install a replacement panel that’s close but not exact, and the gate works fine but the violation letter still lands in your mailbox.
- Operator circuit boards frying in summer heat. Plano regularly sees 105°F days, and an exposed control board in a black steel housing can hit 140°F inside. Boards rated for ten years die in four. We mount operators with airflow and shade in mind, which most original installs never did.
The Plano-Specific Conditions That Change How We Install
Plano’s master-planned suburban boom of the 1980s and 1990s produced a dense concentration of ornamental wrought iron driveway gates, many now 25 to 40 years old and failing in clusters across HOA-governed neighborhoods. You can drive through Willow Bend or along the Preston Road corridor and spot the pattern: same era, same builder, same gate hardware, all wearing out on the same schedule. When one house on the street needs a new operator, three more usually follow within the year.
The clay is the other constant. This is Blackland Prairie soil, which shrinks in drought and swells after rain, and it moves gate posts with a force that surprises people who’ve never dealt with it. A swing gate that sags every spring isn’t a hinge problem. It’s usually a post problem. We set footings below the active clay zone, use larger-diameter posts than the minimum, and brace the gate frame so the whole assembly moves as one unit instead of twisting at the welds.
And then there’s the HOA layer. In Plano’s covenant-governed neighborhoods, installing a new gate almost always means submitting a design for architectural review. The committee cares about picket spacing, finial style, and powder-coat color. A gate that works perfectly but doesn’t match the spec can still trigger a violation. We’ve done enough of these to know which questions the review board asks, and we’ll prepare the spec sheet so your approval doesn’t stall the job.
One more thing worth knowing: on a Preston Road corridor home with a shared driveway, our crew replaced a sagging swing gate that had pulled its hinge post sideways in the clay. We set a new post footing below the swell line, welded fresh hinges, and installed a LiftMaster operator with a safety photocell and loop detector. The neighbor’s vehicle access stayed open the entire time. That’s the kind of job that can’t be rushed, and the kind Plano throws at you more than most cities.
Pricing for Gate Installation in Plano, TX
Here are honest numbers for Plano’s market.
- Single swing driveway gate, steel frame with ornamental infill: $2,800 to $5,500 installed
- Double swing gate, matching set with operators: $7,000 to $15,000 installed
- Sliding gate with rack and pinion operator: $4,500 to $9,500 installed
- Pedestrian gate with self-closing hinge: $800 to $2,200 installed
- Operator only, installed and programmed: $900 to $2,400 depending on brand and access controls
The biggest cost drivers in Plano are gate width and weight, operator type, whether your HOA requires a specific powder-coat finish, and how deep we have to foot the posts. You get a written quote before any work starts, and the price doesn’t change unless you change the scope. Estimates are free. Call (903) 627-2906 and we’ll send someone out to measure.
We Also Serve Cities Near Plano
Most of our Plano crews run routes that reach Allen, Richardson, Addison, and Carrollton the same week. If you’re just outside the city line, you’re still in our regular coverage area. For full details on what we do across the region, see Gate Installation in Plano and the neighborhoods we work every week.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Plano
Yes, in most Plano HOA-governed neighborhoods, you need architectural review approval before installing or replacing a driveway gate. The HOA typically wants to see the gate design, picket spacing, finial style, and powder-coat color before you start. We’ll prepare a spec sheet you can submit, and we know what Plano review boards look for. Call (903) 627-2906 if you want help getting the paperwork right the first time.
It depends on the actual distance from the gate line to the sidewalk or street. A single swing gate needs its full width of clear arc in front, and a double swing gate needs half that per leaf plus operator clearance. On tight Plano lots where the driveway runs close to the property line, a sliding gate is often the better choice. We’ll measure and tell you straight which one fits before you order anything. Estimates are free.
Almost always, the original footing wasn’t deep enough for Plano’s expansive Blackland Prairie clay. Shallow concrete moves with the soil as it shrinks and swells, and the post goes with it. We set footings below the active clay zone and angle the post base for stability, which stops the seasonal heave from pulling your gate out of square. Call (903) 627-2906 and we’ll inspect the post and quote a proper reset.
For most Plano driveway gates, you need both. A keypad controls who gets in, but a loop detector tells the operator when a car is in the gate’s path so it doesn’t close on the vehicle. On a gate that opens onto a public street or sidewalk, a loop or photo-eye is also a code requirement, not just a convenience. We install both as standard on every automatic gate job. Ask us for an exact quote for your setup.
New automatic gate operators in Plano must include at least two entrapment protection measures, typically a monitored photo-eye and an inherent reverse sensor on the motor, plus a manual release for emergency opening. If a gate opens across a sidewalk or into a street, additional protection like a loop detector or edge sensors is usually required. We install to current UL 325 standards and city code on every operator job. Call (903) 627-2906 for a free estimate.
Get Your Plano Gate Installation Started
If you’re ready to replace an aging gate or install one for the first time, call (903) 627-2906. We’ll schedule a free measure, walk your Plano property, check the setback and the soil, and give you a written price before anything is ordered. The 90-Day Done Right Promise applies to every gate we hang. So does the square deal: upfront price, no surprises on the bill.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Plano and the surrounding Dallas-Fort Worth area.