Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Garland
Gate installation in Garland runs from roughly $850 for a basic pedestrian gate up to $9,000 or more for a custom double driveway gate with automation and our Gate Access Control in Garland. Most standard driveway swing gate installations we complete in Garland come in between $2,400 and $5,800, depending on the infill material, post footings, and opener package. We know Garland’s soil, its weather, and the way metal and wood behave on Blackland Prairie clay. Call (903) 627-2906 for a free written estimate, quoted and agreed before any work starts.
We’ve been setting gates in Garland long enough to know what a proper footing looks like here. It runs deeper than the handyman’s two feet of sackrete. The price you’re quoted is the price on the invoice, every time.
Why Ironworks Gate Co. Is Garland’s Preferred Gate Installation Company
Garland homeowners have been calling us for Gate Installation work for years because we build for the soil we’re standing on. The Blackland Prairie doesn’t forgive shortcuts. A post set shallow in wet clay leans by fall. A hinge welded thin snaps in the first hard freeze. We plan for that from day one.
Our technicians are background-checked and uniformed, and they treat your driveway the way they’d treat their own mother’s. We answer the phone live, 24 hours a day, seven days a week. When you call about Gate Repair - Garland for a gate that’s walking out of plumb or a motor that quit after a storm, you talk to a person in the Dallas-Fort Worth office, not a voicemail tree.
Every job we complete in Garland is covered by our 90-Day Done Right Promise in writing. If something is wrong, we come back and make it right. No paperwork, no arguing, no exceptions. Victor Salinas, our owner, signs off on that standard personally.
Our Gate Installation Services in Garland
Driveway Gate Installation
A new driveway gate in Garland needs footings that go below the clay’s active shrink-swell zone. We dig deeper than standard, pour wider piers, and set the posts so the gate won’t drift when the ground cycles through flood and drought. Driveway gate installation typically runs $2,400 to $5,800 for a single gate, and $4,500 to $9,000+ for a double gate with automation.
Swing Gate Installation
Swing gates are the most common installation in Garland, especially on the 1960s and 1970s ranch homes that make up so much of this city. The defining failure we see is a latch-side post heaving two or three inches above the hinge post, leaving a visible diagonal sag. We set posts with that movement in mind. A typical swing gate installation runs $1,900 to $4,200.
Sliding Gate Installation
Sliding gates work well on Garland lots where a swing arc would block the driveway or ditch line. They ride on a track and rollers, which means the track bed has to be compacted properly on expansive soil or the whole thing buckles in wet years. Standard sliding gate installations run $2,800 to $6,500 depending on length and weight.
Pedestrian Gate Installation
For side yards and back entries, a pedestrian gate is the straightforward fix. In Garland, most old pedestrian gates are cedar or pine set in shallow concrete that the clay has long since cracked. A new gate with proper posts runs $850 to $1,800. We match the style to your fence line and set it to swing true.
Double Gate Installation
Double gates are the bread and butter of Garland’s older driveways, where two 6-foot leaves close across a 12-foot opening. After the 2021 ice storm, we reset a twisted swing gate operator arm on a 1970s-era double gate in a central Garland neighborhood off Saturn Road. The hinge posts had tilted in opposite directions from clay shrink-swell, so we cut and repoured 3-foot post footings with deeper concrete piers, then installed a new Liftmaster repair in Garland with a LiftMaster LA400 operator and safety photocell. That gate cycles smoothly now, even as the soil shifts through wet and dry seasons. Expect $4,500 to $9,000+ for a full double gate replacement with automation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Garland
We’re trained and equipped on nine gate-automation brands, but the ones we install most often in Garland are LiftMaster and FAAC. For older Gates that still run a Mighty Mule, we can service and upgrade those too. We keep Gate Parts & Welding in Garland stocked for jobs so you’re not waiting on a ground shipment when your operator quits after a storm. Whatever is on your driveway, we know it, and we can fix or replace it the first visit.
Common Gate Installation Problems We See in Garland Homes
- The walking gate: In Garland, a walking gate is one where the latch-side post has heaved two or three inches above the hinge post due to uneven Blackland Prairie clay moisture. It’s so common that our techs check post differential before touching hinges or hardware. Realigning without re-setting the post just delays the return call by a season.
- Wind load on solid infill gates: A solid wood or metal gate acts like a sail in a North Texas windstorm. If the post footings are shallow or saturated from heavy rain, the whole assembly can push over or snap hinge welds. We size posts and footings for wind load, not just gate weight.
- Post base rot and corrosion: The alternating drought-and-flood weather pattern of North Texas accelerates wood rot at gate post bases and corrodes steel hinges and latches faster than average. Many Garland gates from the 1970s and 1980s have posts that look fine above ground and are hollow below it.
- Operator failure after hard freezes: Garland’s occasional hard freezes, like the 2021 ice storm, crack welds and bend automatic gate operator arms. We see a spike in service calls in the weeks after every freeze. A properly installed operator with a manual release handles it much better than a bargain unit.
Pricing for Gate Installation in Garland, TX
Here’s what you can expect to pay in Garland’s market:
- Pedestrian gate (wood, no automation): $850 - $1,800
- Pedestrian gate (metal, no automation): $1,200 - $2,400
- Single driveway swing gate (wood, no opener): $2,400 - $4,200
- Single driveway swing gate (metal, with LiftMaster operator): $3,800 - $5,800
- Double driveway gate (wood or metal, with operator and safety edges): $4,500 - $9,000+
- Sliding gate (single, tracked, with or without operator): $2,800 - $6,500
These are honest ranges for Garland, not Dallas averages. What moves the number is the gate width, the infill material, whether you want automation, and how deep we need to dig for footings in your particular soil. The price is quoted and agreed in writing before any work starts. Call (903) 627-2906 for a free estimate, and ask about our $50 Off Any Repair Over $250 or the free second opinion on any written estimate.
We Also Serve Cities Near Garland
If you live just outside the city line, we cover Sachse, Rowlett, Richardson, and Plano on the same schedule. Our Gate Installation in Garland crew runs local routes through all of them, including Garland itself, without travel fees that make the estimate climb after you say yes.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Garland
Because the hinges were never the real problem. The post has moved. Garland sits on Blackland Prairie clay that swells when wet and shrinks when dry, and over decades it pushes gate posts inches out of plumb. You can shim and tighten hinges every spring and the gate will sag again by fall. The fix is resetting the post in a deeper footing below the clay’s active shrink-swell zone. If you’d like us to check whether your posts have moved, call (903) 627-2906 and we’ll take a look at the post differential before recommending any hardware work.
Check the gap between the gate leaves at the latch, and look at the top line of the gate against the fence line. If the latch no longer lines up cleanly, or the gate drags on the ground after a storm, the posts likely shifted in saturated soil. Also walk around to look for cracks in the concrete collar at the base of the post. If it’s cracked or the post leans, new footings are the real fix, not just hardware. Call (903) 627-2906 and we’ll assess it honestly.
Find the manual release handle, usually a small lever or pull cord on the operator arm, and pull it to disengage the motor. Then push the gate open by hand and close it behind you. Do not force a gate that binds or fights you. If the operator won’t re-engage or the gate won’t hold position after power returns, call us at (903) 627-2906 and a technician will walk you through it over the phone. We answer 24/7.
Yes, and it does every year. Garland summers regularly exceed 105°F, and that heat plus direct UV breaks down cedar and pine boards fast. The boards cup and twist, the gate loses its square, and the latch stops catching. That’s why we recommend metal frames with wood infill, or fully metal gates, for Garland’s climate. If you want a new gate that won’t warp, call (903) 627-2906 for a free estimate and we’ll show you options that hold up in North Texas heat.
Yes. A new automatic gate operator in Garland must have safety photocells or contact edges that stop and reverse the gate if something or someone is in the path. We install entrapment protection on every new automation job as standard, not as an upsell. It’s not optional and we won’t do the job without it. For a free consultation about what your gate needs, call (903) 627-2906.
Call Ironworks Gate Co. for Gate Installation in Garland
We’ve been doing this work for over 42 years, and we plan to be in North Texas for another forty. When you call, a live person answers. We’ll schedule a time to measure your gate opening, check your soil, and give you a written quote that won’t change. The job gets done right, and we back it with the 90-Day Done Right Promise. Call (903) 627-2906 today and let’s get your new gate set properly the first time.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Garland and the surrounding North Texas communities.