Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Richardson Homeowners
A gate that won’t close, grinds against the track, or sags on its hinges is more than an annoyance. It’s a security problem for your home and a safety risk for anyone using the driveway. Gate Repair - Richardson typically runs $185 to $450 for most common fixes, and most jobs are completed in a single visit. At Ironworks Gate Co., we’ve been repairing driveway and estate gates throughout Richardson for over 42 years, and we answer the phone live at (903) 627-2906 whenever you call.
Victor Salinas leads our Richardson gate repair team with the same standard we’ve held since 1984: diagnose honestly, quote the price before any work starts, and stand behind the repair in writing. No gate company in Richardson has more combined experience with welded steel gates and automated opener systems. When your gate fails, you’ll reach a person who knows what they’re looking at, not a call center - and if it’s urgent, we offer Emergency Gate Repair in Richardson, TX.
What Our Gate Repair Service Includes
Gate repair covers everything that keeps a gate from opening and closing the way it should. From the hinges and posts to the motor and circuit board, our technicians fix the entire system, not just the obvious symptom. Here’s what we handle, and how we handle it.
Electric Gate Repair
Electric gates run on a wired power supply, and most failures trace back to a tripped breaker, a damaged power cable, or a failed control board. We test the full circuit from the panel to the motor, identify the exact fault, and replace only what’s broken. In Richardson neighborhoods like Canyon Creek and Breckinridge Park, older wiring from the 1980s and 1990s is a common culprit, and we know how to work around it safely and to current code.
Automatic Gate Repair
If your gate opens by remote, keypad, or a vehicle sensor, it’s an automatic gate, and the most common failures are dead receiver boards, misaligned safety sensors, and worn drive belts. We carry replacement parts for nine major opener brands on the truck, so most automatic gate repairs in Richardson are finished on the first trip. You’ll get a straight answer on whether to repair or replace, with a price in writing before we turn a wrench.
Hinge & Post Repair
Heavy gates put relentless stress on hinges and posts, and Richardson’s clay soil shifts with every wet-dry cycle, slowly pulling posts out of plumb. We cut out failed welds, true and re-anchor posts, and install heavy-duty hinges sized for the actual weight of the gate. A gate that doesn’t sag will not drag, bind, or tear itself apart, and properly hung hinges are what make a 20-year-old gate work like new.
Gate Realignment
Gates drift out of alignment for a dozen reasons: settling concrete, loose hinge bolts, bent rollers, or a strike from a car. We measure the opening, correct the hang, and reset the stops so the gate closes flush and latches cleanly every time. In Richardson’s older subdivisions like Arapaho Heights and Greenwood Hills, we regularly re-align gates that have been scraping for years, and the fix usually takes under two hours.
Lock Repair
A gate lock that jams or won’t turn leaves your driveway unsecured, and a lock that seizes with the gate closed can trap cars inside. We repair and replace mechanical gate locks, maglocks, and electronic strike plates, keyed alike to your existing keys where possible. If the lock is part of an automated system, we test the full sequence so the gate doesn’t fight the lock when it closes.
Weld & Rust Repair
Wrought iron and steel gates develop cracks at stress points and rust wherever the powder coat or paint has worn through. We grind out the rust, cut out cracked sections, weld in new steel, and refinish the repair so it matches the rest of the gate. Our welders work on ornamental estate gates with the same care we’d give an heirloom fence, and we never leave a repair that looks like a patch.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
We service LiftMaster gate openers more than any other brand in Richardson, and we stock their OEM control boards, receivers, and safety sensors on the truck. LiftMaster’s residential slide and swing openers are tough, but after a decade of Texas heat and rain, capacitors fail and logic boards corrode, and we know exactly where to look. Most LiftMaster repairs are done same-day with factory parts.
We’re also trained and equipped on FAAC, BFT, and Linear systems, which are common on higher-end estate gates throughout Richardson and Far North Dallas. FAAC hydraulic swing operators and BFT’s Italian-designed slide operators each have their own failure patterns, and proper diagnostics without replacing good parts is the difference between a $250 repair and a $1,800 replacement. Whether your opener says LiftMaster, FAAC, BFT, Linear, or any other name on the housing, we can repair it.
Signs You Need Gate Repair Right Now
- The gate scrapes or drags along the ground. This means the gate is sagging on its hinges or the post has started to lean, and every cycle makes it worse. By the time you can hear metal on concrete, the hinges and rollers are wearing fast, and the motor is working harder than it should.
- The opener hums but the gate doesn’t move. A humming motor with no movement usually points to a failed capacitor, a broken gear, or a disconnected drive arm. Letting it run this way can burn out the motor entirely, which turns a simple part swap into a full operator replacement.
- The gate reverses before it fully closes. This is almost always a misaligned safety sensor or a false obstruction signal from debris on the track. In Richardson’s gusty spring, leaves and dirt against the track edge will trigger the safety loop and leave your gate standing open all night.
- The gate is visibly leaning or the post is loose at the base. A leaning post is not just cosmetic; the gate’s entire weight is now pulling against the welds and the operator mount. Richardson’s expansive clay soil makes this common after heavy rain, and the fix is never just tightening a bolt.
- The keypad, remote, or intercom works only sometimes. Intermittent access control is usually a failing receiver board, a dying battery in the remote, or a corroded wire at the keypad. Whatever the cause, a gate that opens only sometimes will eventually not open at all, usually with your car on the wrong side of it.
Our Gate Repair Process - Step by Step
- 1
Call and talk to a person. When you call (903) 627-2906, a live person answers, day or night. We’ll ask what the gate is doing, when it started, and what brand of operator you have, and we’ll schedule a visit at a time that works for you, often the same day.
- 2
On-site diagnosis with the meter and the test light. Our technician arrives in a uniform, introduces himself, and goes through the gate with a multimeter, amp clamp, and mechanical inspection. We test the power supply, control board outputs, sensor alignment, and the physical condition of the hinge posts and welds, then we explain what we found in plain language.
- 3
A written price before any work begins. We write down the repair, the parts costs, the labor, and the total, and we walk you through it before turning a single bolt. The price you approve is the price you pay; if we find something else during the repair, we stop and call you before any additional work.
- 4
The repair itself, done right. We install factory or better-than-factory parts, weld where welding is needed, and torque everything to spec. For automatic gates, we cycle the gate through full open and close loops, reset the travel limits, and confirm the safety reverse works from the right height and pressure. Most jobs are done the same visit.
- 5
Cleanup and a written guarantee. We sweep debris, remove the old parts, and walk the gate with you so you can see and hear it work. Then we hand you our written 90-Day Done Right Promise: if anything isn’t right, we come back and make it right, no paperwork, no arguing.
How Much Does Gate Repair Cost in Richardson?
Best Gate Repair in Richardson, TX typically falls between $185 and $450 for most common fixes, with more involved structural work running higher. Here’s what we see most often in Richardson homes.
- Hinge replacement and re-hang: $195 to $350, depending on gate size and hinge type.
- Gate realignment and track adjustment: $225 to $400, including new rollers where needed.
- Lock repair or replacement: $165 to $290 for Most mechanical locks; electronic strikes and maglocks run $400 to $800 with parts.
- Weld repair and rust treatment: $250 to $600, depending on the extent of the damage and refinishing.
- Opener board, capacitor, or receiver replacement: $275 to $550, including the part and programming.
- Full operator replacement: $1,400 to $3,200, depending on the opener type and gate weight.
What moves a repair up or down in price: the weight and length of the gate, whether the post needs re-anchoring in concrete, the brand and availability of the operator parts, and whether rust repair requires refinishing. We always quote the full price before work starts, and our free estimate tells you exactly what’s included. If a competitor has given you a quote we can beat without cutting corners, we’ll give you a free second opinion, and if it’s a written estimate, we’ll match it when the scope is the same. We also offer $50 off any repair over $250, and a permanent 5% discount for seniors and veterans.
Gate Repair Near Richardson - Our Service Area
We’re based in Richardson and serve the surrounding communities with the same team and the same guarantee. You’ll find us repairing gates in Far North Dallas, Plano, Murphy, Sachse, Parker, Allen, and Rowlett throughout the week, and in Addison and Garland most days. If you live in Farmers Branch or Carrollton, we’re usually there within a day or two. For a sense of what to look for before a pro arrives, our home page has a walkthrough of how we handle common gate issues, and you can see similar work we do in Gate Repair in Addison or Gate Repair in Garland.
Serving Richardson, TX - Our Local Coverage Area
We’re based in the Richardson area and know this community well, and we also provide our Gate Repair in Addison. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Richardson
Gate repair is any work that restores a driveway or estate gate to proper operation, from re-hanging sagging hinges and re-welding cracked steel to replacing failed opener boards, sensors, or lock hardware. At Ironworks Gate Co., it covers the full system: mechanical, structural, and electrical. A proper gate repair fixes the root cause, not just the symptom that got your attention.
Most common repairs, like hinge replacement, realignment, or a capacitor swap, are completed in one visit that lasts between one and three hours. Structural repairs that need concrete to cure, like re-anchoring a post, add a day of cure time before the gate goes back up. We’ll give you a clear time estimate when we quote the job.
Most gate repairs run between $185 and $450, with structural weld work or full operator replacements running higher depending on the gate and opener. We quote the full price before any work starts, and we never add surprises after the fact. Call (903) 627-2906 for a free, no-obligation estimate.
Yes; we service and repair LiftMaster residential slide and swing openers, and we stock their common OEM control boards, sensors, and remotes on our trucks. Whether it’s a failed capacitor, a dead receiver board, or a worn drive belt, most LiftMaster repairs are done same-day. We also service FAAC, BFT, and Linear systems.
Most of our Richardson repair calls are resolved the same day or the next morning, and because a live person answers the phone 24 hours a day, you’ll know exactly when we can be there before you hang up. If your gate is stuck open and your property is exposed, tell the person on the line and we’ll prioritize the visit. Call (903) 627-2906 any time.
Every repair is backed by our written 90-Day Done Right Promise: if something we fixed isn’t right, we come back and make it right, no paperwork and no arguing. We’ve stood behind our gate work in Richardson this way for over 42 years, and the guarantee is part of every invoice we hand you.
Make sure the gate area is clear of cars, bins, or overgrown plants so we can access the posts, track, and operator without obstruction, and if your gate has a key or a manual release, know where it is. You don’t need to move anything heavy or disconnect anything; we’ll handle the gate and the opener. If the gate is stuck closed, use the manual release if you’re comfortable doing so, or wait for us; forcing a gate can bend the drive arm or strip the gearbox.
Schedule Your Gate Repair Service in Richardson Today
When your gate is down, you want a company that answers the phone and shows up when it says it will. That’s us, and it has been for over 42 years. Call (903) 627-2906 now for a free, no-obligation estimate, and we’ll have your gate closing right, backed in writing by our 90-Day Done Right Promise.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Richardson, TX since 1984.