Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Dallas
Gate parts and welding in North Dallas most often comes down to one thing: a gate post that has shifted in the black clay soil beneath Tollway-corridor neighborhoods like Preston Hollow, Bent Tree, and the master-planned communities running north from LBJ. Hinges that held straight for twenty years suddenly bind. A latch that clicked shut now misses by half an inch. The gate itself is usually fine. The ground under it is not. We arrive at North Dallas homes ready to cut, weld, and reset this same failure mode, because it is the dominant repair call in this city. Call (903) 627-2906 any hour, and a live person answers.
Why Ironworks Gate Co. Is North Dallas’s Preferred Gate Parts & Welding Company
Homeowners in North Dallas call us because we understand how a 1980s Preston Hollow estate gate differs from a 2000s Tollway subdivision gate, and we plan the work accordingly. The older ornamental gates are heavier, built from solid bar stock, and often carry hand-forged picket details that no one manufactures anymore. The newer ones are lighter but ride on operators that are now 25 years old and reaching the end of their service life. Our Gate Parts & Welding team handles both without treating them as the same job.
Victor Salinas, who leads our crew, learned to weld on exactly this type of North Dallas ironwork: long driveway gates where the gate looks plumb but the hinge post has rotated a few degrees underground. Hairline cracks at weld joints get caught before they spread. Hinge barrels that have wallowed out get replaced rather than greased and ignored. This is the work that keeps an automated gate closing like the day it was hung, and it is the reason North Dallas homeowners keep our number written on the inside of their garage door.
Every completed job carries the 90-Day Done Right Promise in writing. If our weld or reset is not right, we come back and make it right. No paperwork, no arguing. That is the Keystone Standard on every North Dallas gate we touch.
Our Gate Parts & Welding Services in North Dallas
Post Replacement
North Dallas gate posts fail from below, not above. The expansive clay under neighborhoods from Royal Lane to Forest Lane swells in wet seasons and shrinks in drought, levering posts out of plumb a fraction of a degree at a time. We cut the old post at the footing, pour a deeper pier with helical tie-backs that resist the next swell cycle, and set the new post true. A North Dallas post replacement typically runs $650 to $1,400 depending on gate weight and post size.
Sag Correction
A sagging gate in North Dallas usually means the hinge post has moved, not the gate. We correct the post, re-weld the hinge mount, and if needed, add a mid-rail gusset to stop the gate from drooping at the latch side. Most sag corrections run $300 to $800 and are completed in a single visit for North Dallas customers.
Rail Repair
Stress-fatigued welds on gate rails are common on 1990s Tollway-boom gates that cycle thousands of times a year. We grind out the cracked weld, bevel both sides, and lay full-penetration passes that match or exceed the original joint strength. Rail repairs in North Dallas typically run $250 to $650 per joint, depending on rail profile and access to both sides.
Custom Welding
When an HOA architectural committee requires an exact picket-style match on a 1980s Preston Hollow gate, we fabricate replacement sections in our shop and weld them on site. Curved top rails, scrollwork, custom hinges, rack-and-pinion conversions on slide gates: if it is metal and it belongs to a gate, we weld it. Custom welding in North Dallas starts around $350 and is quoted in writing before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Dallas
We are factory-trained and equipped to service LiftMaster, FAAC, BFT, and Linear gate operators, along with five other major brands. For North Dallas homeowners that means we show up with the right parts on the truck, not a notebook and a promise to come back next week. A FAAC operator on a Bent Tree swing gate gets FAAC-specific diagnostics. A LiftMaster slide gate near Preston and Royal gets LiftMaster parts, not a knockoff. We stock common hinge pins, roller assemblies, and weld-in repair plates locally so most North Dallas jobs finish same-day.
Common Gate Parts & Welding Problems We See in North Dallas Homes
- Hinge posts rotating in black clay. The same soil movement that cracks driveways along the Tollway corridor tilts gate posts a few degrees each drought-flood cycle. The gate binds, the auto-close safety beam misses, and the latch side sags even though the gate itself is straight.
- Stress-fatigued welds on 25-year-old operators. Gates built during the 1990s Tollway boom are hitting end of service life. Operators that once cycled quietly now jerk through open-close cycles, and the repeated shock cracks welds at hinge mounts and rail joints.
- HOA approval stalls on simple weld repairs. Master-planned communities from LBJ northward through Addison and into Far North Dallas frequently require architectural committee sign-off on finish color and picket profile before any visible panel work. A weld repair that takes one afternoon can sit for three weeks waiting on a committee calendar.
- Hard freezes seized hinge grease and cracked circuit boards. North Dallas ice storms drop temperatures fast enough to seize unlubricated hinge barrels and damage operator boards not rated for sustained sub-freezing temps. We see the same surge of calls after every hard-freeze week.
Key Takeaways for Your North Dallas Gate
- Most gate sag in North Dallas is a post problem, not a gate problem, and the fix requires resetting the footing in expansive clay.
- HOA architectural approval can take two to four weeks in some Tollway-corridor communities. We help you file the request correctly the first time.
- Your price is written and agreed before we start. No surprises on the bill, every single job.
- Every weld, hinge, and post carries our written 90-Day Done Right Promise.
Pricing for Gate Parts & Welding in North Dallas, TX
A typical hinge replacement in North Dallas runs $180 to $420 for a single ornamental swing-gate pair, including hinge pins, bushings, and setup. Post replacement runs $650 to $1,400 depending on gate weight, post size, and whether we are pouring a new footing with helical anchors to resist clay movement. Rail repair runs $250 to $650 per welded joint. Custom welding starts around $350 for small fabrications and is quoted per project. What moves the price in North Dallas specifically: how far the post has rotated, whether the gate is solid bar stock or hollow tube, and whether your HOA requires a matching finish we need to reproduce. You get the full written price before we touch the gate. Call (903) 627-2906 for a free estimate, and ask about the current offers: $50 Off Any Repair Over $250, a Free Second Opinion on any written estimate, the $89 Seasonal Tune-Up, and a permanent 5% Senior and Veteran discount.
We Also Serve Cities Near North Dallas
Our crews serve Gate Parts & Welding in North Dallas and the surrounding communities, including Richardson, Addison, Garland, and Far North Dallas. If you live just outside North Dallas and your gate is sagging, call us. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve North Dallas locally.
Serving North Dallas, TX - Our Local Coverage Area
We’re based in the North Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Dallas
In most North Dallas master-planned communities, yes. If the visible finished surface changes, such as a new panel with a different picket profile or finish color, the architectural control committee usually requires pre-approval. The approval window commonly runs two to four weeks. If we are repairing the existing panel in place with no visible change, approval is often not required. We will tell you which category your job falls into before any work starts. Call (903) 627-2906 and we will walk you through it.
Because the hinge post is moving underground. North Dallas sits on expansive black clay that swells when wet and shrinks when dry, tilting the post a few degrees over time. The gate has not bent; the post has rotated, pulling the latch side down and out of alignment. The permanent fix is resetting the post in a deeper footing, which we do regularly in North Dallas.
Yes. This is a conversion we have done for North Dallas homeowners whose original chain-drive operators have reached end of life. We weld the rack to the inside face of the gate rail, align the pinion, and set the new operator with correct travel limits. The job usually takes one visit, and your written quote includes the full conversion before we start.
Yes, entrapment protection is required by UL 325 safety standards for all automated gate operators, including in North Dallas. If we are resetting a post and remounting your operator, we check that the photocell beam alignment and any pressure-reversing settings are working correctly as part of the job. A gate operator that reverses only when it hits an obstruction is not compliant and is not safe.
Yes, in most cases we can match it. We fabricate the damaged section in our shop, reproduce the original picket profile and weld pattern, and blend the repair into the existing gate. HOA committees in Preston Hollow and surrounding enclaves often require this exact match, and we have done it many times. Call (903) 627-2906 for a free estimate.
The Soil Under Your Gate Is the Real North Dallas Problem
North Dallas’s expansive black clay is the same shrink-swell geology that cracks foundations and sidewalks from the Tollway corridor east to Central Expressway. For gate owners, it does something specific and recurring: it tilts the hinge post, a few degrees in a drought, back a bit after heavy rain, and then a little more the next year. The result is a gate that sags at the latch side, rubs at the bottom rail, and trips the auto-close reversal at the worst moments. No hinge, roller, or operator is strong enough to fight the soil forever. The fix is in the footing: deeper piers, helical anchors, and a post set plumb enough that the gate stays true through multiple swell cycles.
We learned this on a Preston Hollow estate off Royal Lane not long ago. A 22-foot ornamental swing gate had sagged 2 inches at the latch side. The homeowner had adjusted the hinges twice the year before. Our crew found the hinge post rotated in the black clay footing. We cut the old post, poured a deeper pier with helical tie-backs to resist the next swell cycle, re-welded the rail with full-penetration passes, and remounted the FAAC operator so the safety photocell beam aligned cleanly. The HOA sign-off came through the following week because we matched the original picket profile exactly. That gate has not sagged since.
Not Just Welding: We Handle the Whole Gate System
Gate parts and welding in North Dallas means more than torch work. It includes the rollers, latches, locks, and operators that make the gate useful. We carry hinge pins, roller assemblies, latch rebuild kits, and weld-in repair plates for the common gate styles along Preston Road and the Tollway corridor. When a BFT or Linear operator is acting up, we diagnose it in place rather than selling a replacement first. When a weld repair is called for, we do it cleanly and paint it to match. This is the full scope, from the post in the ground to the keypad on the post.
Call Ironworks Gate Co. for Gate Parts & Welding in North Dallas
If your gate is sagging, binding, or cracked at the welds, call (903) 627-2906. A live person answers, 24 hours a day, 7 days a week. We will schedule a North Dallas visit, give you a written quote before any work begins, and stand behind the job with the 90-Day Done Right Promise. Background-checked, uniformed technicians work in your North Dallas home the way they would work in their own mother’s. The final price is the price you agreed to. That is a square deal, and it has been our way for over 42 years.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Dallas with honest gate work and straight answers.