Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Highland Park
Gate parts and welding in Highland Park, TX is about matching original ironwork, not swapping in whatever fits. Most homes here were built between the 1920s and 1950s, and the gates hung on those estates were fabricated to match the house, monogrammed crest panels and all. When a hinge barrel wears egg-shaped or a post heels out of plumb, the fix is restoration-level work, not a catalog part. Ironworks Gate Co. has been doing exactly that for over 42 years, and our Gate Parts & Welding team understands what Highland Park homeowners will and won’t accept. If your gate is sagging, dragging, or throwing operator errors, call (903) 627-2906. A live person answers, day or night.
Why Ironworks Gate Co. Is Highland Park’s Preferred Gate Parts & Welding Company
Highland Park is not a neighborhood where you gamble on a handyman with a stick welder. The gates here along Armstrong Parkway, Lakeside Drive, and the streets off Preston Road are one-of-a-kind. Homeowners notice when a replacement hinge does not match the original cast iron, and they notice when a crew does not understand setback rules under Highland Park’s own municipal authority. We have worked on enough Tudor, Colonial, and Mediterranean Revival estates in Gate Parts & Welding in Highland Park to know what gets flagged and what gets approved.
Our background-checked, uniformed technicians arrive when we say they will. Most jobs are completed in a single visit, and every one is protected by the written 90-Day Done Right Promise. No paperwork, no arguing. If it is not right, we come back and make it right. That is the Keystone Standard on every job, from a simple latch adjustment to a full post reset behind a 700-pound swing gate.
Our Gate Parts & Welding Services in Highland Park
Hinge Replacement
Original cast iron hinge barrels on Highland Park’s older estate gates wear egg-shaped after decades of cycling. The gate starts to sag, the latch misses, and the operator faults. We do not bolt on a mismatched modern hinge unless the owner asks for it. We weld, rebore, or fabricate a replacement barrel that matches the original profile, then re-hang the gate so it swings true. On a 1930s gate, that means preserving the original strapwork and not drilling new holes through custom panels.
Post Replacement
The black clay under the Park Cities expands in wet springs and shrinks in dry summers. Gate posts heave, sink, and tilt. A post that is two degrees out of plumb is enough to throw the latch strike off by half an inch and force the operator to reverse. We dig out the old footing, set a new one with deeper rebar, and reset the post in concrete. Then we re-hang the gate and verify the operator’s limits before we leave. If your post has been straightened once already and is leaning again, the footing was never the right depth for this soil. We fix that.
Rail Repair
Rails on older Highland Park gates are often ornamental, not structural, which means a crack or a rust-through weakens the whole assembly. We weld rails back to original profile, reinforce from the back side where we can, and match the finish so the repair does not announce itself. For gates with custom cast panels, we work around the panel rather than through it.
Custom Welding
Cracked scrollwork, broken pickets, a monogrammed cast panel with a hairline crack running through the crest. This is the work we do most often in Highland Park. We weld cast iron with the right preheat and filler so the crack closes clean and holds. We match the texture and profile of original ironwork, and we do not suggest switching to a modern panel because a modern panel looks wrong on a 1930s Tudor. That is the job, and we take it seriously.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Highland Park
Highland Park’s older gates run on legacy LiftMaster, FAAC, and Elite operators, and those control boards fail outright after enough Texas heat cycles. We are trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, and Mighty Mule, so when a 30-year-old board dies, we can tell you honestly whether it can be retrofitted with custom wiring and relay adapters or whether replacement is the cheaper answer. We carry common parts for Highland Park jobs on the truck, which means most repairs happen in one visit, not three.
Common Gate Parts & Welding Problems We See in Highland Park Homes
- Hinge posts leaning after every dry summer. The expansive clay shrinks, the footing shifts, and the gate drags on the latch side. Straightening the post without resetting the footing is a temporary fix that will fail again by August.
- Obsolete control boards on legacy operators. A LiftMaster or FAAC board from 1995 is not plug-and-play with a new one. Matching a modern board to an old motor often requires custom wiring and a relay adapter, plus someone who has done it before.
- Egg-shaped hinge barrels on original cast iron. Decades of cycling wear the barrel wall thin. The gate sags, the operator faults, and the fix is welding or reboring the existing iron, not bolting on a generic hinge.
- Cracked custom cast panels. Crests, monograms, and rosettes fabricated in the 1920s through 1950s crack from age and stress. Welding cast iron requires preheat and the right filler, and a botched weld will crack again within a season.
Pricing for Gate Parts & Welding in Highland Park, TX
A typical hinge replacement in Highland Park runs $275 to $460 per hinge, depending on whether the barrel needs welding and reboring or a full replacement fabricated. Post replacement with a new concrete footing runs $650 to $1,400 per post, with deeper footings and rebar cages at the high end because of the clay soil. Custom welding repair on a cracked cast panel or broken scrollwork runs $180 to $420 for a standard repair, and $40 to $90 for a minor touch-up on a picket or finial. The price is quoted and agreed before the first bolt is turned, never after. Call (903) 627-2906 for an exact quote on your gate. Estimates are free, and we stand by the number we give you.
We Also Serve Cities Near Highland Park
Ironworks Gate Co. serves Highland Park homeowners directly, and our crews also cover Richardson, Addison, Garland, and Far North Dallas. Dispatch is coordinated from our Dallas-Fort Worth office, but the trucks roll into Highland Park with the parts and welding equipment already loaded. If you’re in one of those nearby cities, the same 90-Day Done Right Promise applies.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Highland Park
We can repair the original cast iron hinge in most cases, and that’s usually the right approach on a 1930s Highland Park gate. The original barrel can be welded or rebored to remove the egg-shaped wear, then re-pinned and re-hung. We only recommend a replacement hinge if the iron has cracked through the barrel or the strap, and even then we’ll fabricate a matching profile rather than bolt on something that looks out of place. Call (903) 627-2906 to have your hinge assessed.
The post keeps leaning because the black clay soil under Highland Park shrinks in dry weather and swells in wet weather, and the footing underneath the post is not deep enough to ride out that movement. Straightening the post without digging out and replacing the footing is a temporary fix. We reset the post in a new concrete footing with deeper rebar, which is the only way to keep it plumb through the August drought. Call (903) 627-2906 for a quote on a proper post reset.
We can weld a cracked cast panel so the repair is nearly invisible and structurally sound, but the crack does not literally disappear. Cast iron welding requires preheating the piece, using the right filler, and cooling it slowly so the repair does not crack again. We match the texture of the surrounding panel and finish the repair so from three feet away you will not see it. Call (903) 627-2906 and we’ll take a look at the panel.
For operators under 15 years old with a healthy motor, repairing is usually cheaper. For a 30-year-old LiftMaster or FAAC with an obsolete control board, replacement is often the less expensive option once you account for custom wiring, relay adapters, and the likelihood that the next component fails. We’ll give you the numbers for both paths before you decide, quoted in writing. Call (903) 627-2906 for a free assessment.
It is almost always a parts problem: the hinge post has moved out of plumb and the latch strike misses by half an inch, which trips the operator’s obstruction sensing. The fix is resetting the post and realigning the latch, not replacing the operator. In Highland Park’s clay soil, this is one of the most common calls we handle. Call (903) 627-2906 and we’ll find out which part moved.
Call Ironworks Gate Co. for Gate Parts & Welding in Highland Park
If your gate is sagging, dragging, cracked, or throwing operator codes, call (903) 627-2906. A live person answers, 24 hours a day, seven days a week. We’ll give you an honest assessment, a written price before any work starts, and the 90-Day Done Right Promise on every job. Highland Park homeowners don’t want a temporary fix. They want the gate their house came with, closing like it did the day it was hung. That is what we do.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Highland Park with gate parts, welding, and automation repair since 1984.