Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Garland, TX
If your gate has started dragging across the driveway or the latch no longer lines up, you’re not imagining it. Garland’s clay soil moves under our feet, and after enough wet and dry cycles, it takes gate posts with it. A gate that worked fine in March can be binding by August. Ironworks Gate Co. repairs, resets, and rebuilds gates across Garland, with most jobs finished in one visit and the price agreed before we turn a single bolt. Call (903) 627-2906 and a live person answers, day or night.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Garland Homeowners Choose Ironworks Gate Co.
We’ve been at this for over 42 years, since 1984, and the folks who call us tend to have been in their homes for twenty, thirty, sometimes forty years. They’ve seen handyman fixes fail. They’ve had gates that sagged again by spring. We earn their trust the slow way: by showing up when we say we will, by checking the post before we touch the hinge, and by putting our work in writing. Every job carries the 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing.
Our technicians are background-checked and uniformed, and they treat your home the way they’d treat their own mother’s. You’ll find us in neighborhoods across Garland, from the established streets of Springpark and Travis College-Hillcrest to the larger lots out by Firewheel and the homes along Campbell Road. We know what these gates have been through. Over 42 years in North Texas teaches you things you can’t learn from a manual.
Gate Repair Services We Offer in Garland
Gate Repair
From dragging gates to sagging pickets, we repair what Garland’s clay and weather have done to your gate. Post resets, hinge realignment, latch replacement, and full re-hangs are the core of what we do, and we do it so the gate works like the day it was hung. Most repairs are done in one visit, with the price settled before we start.
Learn more about our Gate Repair in Garland.
Gate Installation
A new gate, built and hung correctly for Garland soil, means deeper posts, proper drainage, and hardware sized for our climate. We install wood, steel, and custom gates, and we always quote before we order anything. You’ll know the full cost in writing before the first board is cut.
Learn more about our Gate Installation in Garland.
Gate Motor & Opener
When an automatic gate stops opening, it’s often the operator, the limits, or the arm, and our techs are trained and equipped on nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We diagnose on the first visit and repair most openers same day, weather permitting.
Learn more about our Gate Motor & Opener in Garland.
Gate Access Control
Keypads, intercoms, telephone entry, vehicle sensors, and card readers all need clean wiring and proper grounding to survive Texas thunderstorms. We install and repair access systems that work consistently, and we stand behind every job with the same written promise. We’ll set it up so it works for you, not against you.
Contact us at (903) 627-2906 to discuss Gate Access Control in Garland for your property.
Gate Parts & Welding
Cracked welds, broken hinges, missing pickets, failed boards. We keep a full shop of Garland Gate Parts & Welding supplies and we fabricate and weld on-site for structural repairs that actually hold. When a gate has been patched with lag screws and good intentions, we’ll rebuild it right.
Call (903) 627-2906 and we’ll tell you straight what the repair needs.
Neighborhoods We Serve in Garland
We work throughout Garland, and our dispatch is set up so a tech can usually reach you within about 45 to 60 minutes in most neighborhoods. You’ll see our trucks in:
- Springpark
- Coomer Creek
- Firewheel
- Travis College-Hillcrest
- Oakridge
Don’t see yours here? If you’re inside Garland city limits, we cover it.
Why Garland’s Climate & Housing Affect Gate Repair
Garland sits squarely on the Blackland Prairie’s expansive clay soils. Those soils swell when wet and shrink when dry, moving with more force than most people realize. It’s enough to heave a gate post a full two or three inches out of level over the course of a few seasons, and once the post moves, the gate starts to bind, drag, or gap. In the established neighborhoods of south and central Garland, where most homes were built in the 1960s through the 1980s, the original posts were often set in shallow concrete that has long since cracked. The result is what locals call a “walking gate”: a visible diagonal sag where the latch side sits higher than the hinge side. Any real repair starts with measuring that differential, not just swapping hardware.
The weather multiplies the problem. Garland summers push past 105°F and bake gate boards until they warp and cup. Freezes like the one in 2021 crack welds and bend operator arms. And when the rains return, water wicks up into cedar and pine posts and starts the rot at ground level. We see a spike in calls after every drought and every deep freeze, because these gates fail in waves. Newer homes in Firewheel don’t escape it either, though their gates often have better drainage and deeper posts. The soil doesn’t care how new the house is.
Pricing for Gate Repair in Garland
Gate repair in Garland is usually priced by the job, not by the hour, and we quote you a written price before any work begins. You’ll know what it costs, then you decide. Rough ranges for common jobs:
- Hinge realignment or latch replacement: $120-$240
- Post reset (one post, includes concrete): $220-$380
- Gate re-hang with full hardware replacement: $350-$650
- Opener motor repair or arm replacement: $180-$420
- Full wood gate replacement (6-foot privacy): $600-$1,400 depending on material
We also offer a $89 Seasonal Tune-Up, $50 off any repair over $250, and a permanent 5% discount for seniors and veterans. Every quote is free.
Service Area - Cities Near Garland
We’re based in Garland and serve the surrounding communities, including home service calls in Sachse, Rowlett, Richardson, and Plano. If you’re on the edge of town, call anyway, and we’ll tell you straight whether we can get there and when.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Garland
Because the clay soil under the posts expands when wet and shrinks when dry, moving the posts unevenly. This is the same force that cracks sidewalks and foundations all over Garland. A proper repair means resetting the post with deeper concrete and proper drainage, not just tightening the hinges. Call (903) 627-2906 and we’ll measure the post differential before we recommend anything.
It’s common enough in Garland that experienced techs call it a “walking gate.” What you’re seeing is the latch-side post heaving upward as the soil beneath it swells. If you just force the latch to close, you’ll be doing it again in a few months. The fix is shimming or resetting that post, and our estimate is free.
Most opener issues are resolved in a single visit, and we stock common parts for LiftMaster, FAAC, BFT, and the other major brands on our trucks. Whether we can get there same day depends on how the schedule looks and where you are in Garland, but we’ll give you an honest window when you call (903) 627-2906. We don’t promise times we can’t keep.
A complete installation includes removing the old gate, inspecting and resetting the posts if needed, building or ordering the new gate, and hanging it with new hardware sized for our climate. If there’s a motor, we run the power and set the limits and safety edges as part of the job. We quote the whole thing in writing before anything is ordered. Call for a free measure and written price.
A single post reset in Garland usually runs $220-$380, depending on how deep the old concrete goes and whether we’re removing or saving the existing gate panel. You’ll get a written price before we start, not after. Call (903) 627-2906 for a free estimate, and ask about the free second opinion if someone else has quoted you already.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Garland, TX since 1984.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Garland Customers Say
"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"Used them at two properties now. Both times they diagnosed it on the first visit instead of guessing and coming back."
- Rohan Shah"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson