Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Farmers Branch
A new driveway gate in Farmers Branch typically runs $1,400 to $6,800 for a standard residential installation, with commercial slide gates along the I-35E corridor starting around $4,500 and climbing past $18,000 depending on duty cycle and access control. We complete most single-family gate installs in one to two working days and always resolve the access situation before we start digging or welding. If you’re off Valley View, Marsh Lane, or anywhere in the 75234 zip, call (903) 627-2906 and we’ll get you a real price, not a guess, before any work happens.
Why Ironworks Gate Co. Is Farmers Branch’s Preferred Gate Installation Company
We’ve been at this as a company since 1984, and the work we see in Farmers Branch is its own animal. The postwar blocks between Josey Lane and Inwood Road hold a lot of original ornamental iron driveway gates hung before most current homeowners bought the place. Those gates don’t just need replacement hardware, they need someone who understands what sixty years of Texas sun and black clay soil do to iron and concrete. Our technicians show up in uniform, background-checked, and they work the way our owner Victor Salinas demands: Krafted right, every time, your home first, standing behind it. We write the 90-Day Done Right Promise on every invoice, no separate paperwork to chase.
Farmers Branch customers see our trucks because we dispatch locally from the metro office and know the streets. We’ve replaced gate posts off Golfing Green Drive, fitted slide gates on lots off Dennis Lane where a swing leaf would eat half the driveway, and rebuilt commercial operators for properties facing Stemmons Freeway that cycle loaded trucks forty times a shift. A live person answers our phone day or night. When a gate fails and your driveway is blocked off Spring Valley Road, you don’t want a voicemail.
Our Gate Installation Services in Farmers Branch
We install and automate every type of gate you’ll find in this city, from a narrow pedestrian gate in a side yard to a 40-foot commercial slide gate on a warehouse lot. Full scope: new gate fabrication, post setting, operator install, safety loops and edges, keypads, remotes, and the walking gate that keeps your neighbors moving. Our Gate Installation team handles it all under one roof, which means you’re not coordinating a welder one week and an electrician the next.
Driveway Gate Installation
Most Farmers Branch homes sit on lots from the 1950s to 1970s, which means driveways are narrower than what you’d find in newer North Dallas developments. A swing gate that works beautifully in Frisco might clip a car door or block the sidewalk here. We measure from the actual property line and setback, not a catalog drawing, and we’ll tell you honestly if a slide gate is the better path on your lot.
Sliding Gate Installation
Tight lots and short driveways are the rule across Farmers Branch, where a swing leaf can’t arc without hitting the house corner or spilling over a swale. Sliding gates solve that by traveling parallel to the property line on a track and rollers, using almost no driveway space. We install cantilever slide gates where tracks would clog with grass or debris from the black clay, and we set posts deep enough that a wet DFW spring won’t rack the frame.
Pedestrian Gate Installation
A separate pedestrian gate keeps foot traffic off the vehicle gate and extends the life of the operator. On shared driveway properties throughout Farmers Branch, we’ve installed keypad-equipped pedestrian gates so neighbors, mail carriers, and utility techs can come through without cycling the heavy driveway gate ten extra times a day. That’s the kind of detail that keeps a motor alive for years instead of months.
Swing Gate Installation
Original ornamental iron swing gates are the signature look of Farmers Branch’s ranch-era homes, and when the hinge pintles wear out or a post tilts, we can rebuild rather than replace. We weld new pintles onto existing iron where the metal is sound, set hinge posts in oversized footings to resist clay movement, and pair old-world ironwork with a modern LiftMaster or Mighty Mule operator hidden out of sight.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Farmers Branch
Our technicians are factory-trained on nine gate-automation brands, and for Farmers Branch we keep the most common local parts on the truck: LiftMaster and Mighty Mule boards and remotes for residential installs, plus FAAC and BFT arms and limit switches for the commercial slide gates along I-35E. That means fewer second trips and faster installs when your opener pairs up with an existing brand already on the property. If you inherited a gate with an unknown operator and want it automated, we can match what you have or suggest a dependable replacement without pitching something you don’t need.
Common Gate Installation Problems We See in Farmers Branch Homes
- Black clay post movement: Farmers Branch sits on Dallas County’s expansive clay, which dries and cracks in summer then swells after rain. A post set in a shallow footing heaves within one season, so we excavate deeper and pour oversized concrete collars with rebar.
- Swing gate on a short driveway: Properties off Dennis Lane and Golfing Green often lack the setback for a swing leaf. We spec slide gates so the gate never blocks the sidewalk or clips the house on its arc of travel.
- Shared driveway access during install: Many Farmers Branch homes share a driveway, and closing the only vehicle entry for a day isn’t acceptable. We phase the work and set temporary access so residents and delivery trucks keep moving.
- Original iron fatigue and corrosion: Gates hung in the 1960s carry decades of rust at the pintle welds and latch points. We inspect the iron before quoting so you know what’s sound and what needs fresh weldment, rather than bolting a new operator onto compromised steel.
Pricing for Gate Installation in Farmers Branch, TX
Straight numbers for this market. A basic single swing driveway gate in Farmers Branch, steel frame with ornamental infill, runs $1,400 to $3,200 unautomated. Add a LiftMaster or Mighty Mule operator and you’re at $2,800 to $5,400 installed. A custom sliding gate with automation lands between $4,500 and $8,500 for residential work. Commercial slide gates along Stemmons Freeway, with heavier frames and industrial operators, start around $6,500 and climb to $18,000 and above with access control, safety loops, and heavier duty cycle. A pedestrian gate alone runs $600 to $1,800 installed. Senior and veteran customers always get 5% off, and we’ll come out free to measure and give you a written price before a single bolt turns. You’ll know the full number before we start, and it’s the number on the invoice.
We Also Serve Cities Near Farmers Branch
While this page focuses on Farmers Branch, our installers also cover Richardson, Addison, Garland, and Far North Dallas on a regular schedule. If you’re in a neighboring city with a gate problem, the same crew and the same written guarantee apply. Call (903) 627-2906 and we’ll route you to the right technician.
Serving Farmers Branch, TX - Our Local Coverage Area
We’re based in the Farmers Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Farmers Branch
Sliding gates are the right call on most Farmers Branch lots built between 1955 and 1975 because the driveways are short and the setbacks tight. A swing gate needs clearance equal to its leaf width to open, and on many properties off Josey Lane or Marsh Lane that arc would cross the sidewalk or hit a parked car. A slide gate travels sideways along the fence line and uses almost no driveway length. We’ll measure your actual space and tell you straight whether a swing leaf fits or a slide is the only workable option, then quote accordingly. Call (903) 627-2906 for a free measure.
Leaning gate posts in Farmers Branch come from the expansive black clay soil, which shrinks in the dry heat and swells when the rains return, pushing shallow footings out of plumb. Our crew digs below the active clay zone and pours concrete footings oversized for the post, wrapped in rebar, so the gate stays square through the seasonal cycle. We also coat steel posts below grade to slow corrosion. If you’ve already had a post set once and it’s moving again, call us for an assessment before you pay for another reset.
Yes, and in Farmers Branch we do it often. Most of the original ornamental iron gates on this city’s ranch-style homes still have sound steel at the hinge stiles, even when the latch and pintles are shot. We weld new hinge hardware where needed, grind out rust, repaint, and then mount a LiftMaster, Mighty Mule, or FAAC operator sized for the gate’s actual weight. You keep the ironwork that matches the house and gain automation. Call (903) 627-2906 for a free estimate; $50 off applies to any repair over $250 while we’re out.
We phase the work and keep access live. On shared driveways, which are common across Farmers Branch’s older neighborhoods, we set the new gate and posts in a sequence that never closes the only vehicle path. If temporary access is needed, we coordinate with every resident first and schedule the work during weekday hours. On one shared driveway off Valley View Lane, we replaced a corroded 1960s swing gate while the neighbors kept using the driveway, then added a pedestrian gate with keypad entry so no one cycled the main gate just to walk through.
Commercial slide gates along Stemmons Freeway face loaded freight trucks passing through dozens of times a day, so the gate needs a heavier frame, heavier rollers, an industrial-grade operator, safety loops and edges, and often an access control keypad or card reader. We spec FAAC or BFT operators for continuous cycling and use thicker steel for the gate frame than a residential driveway requires. The installation also has to satisfy higher code requirements for entrapment sensors. If you manage a property along the corridor, call (903) 627-2906 and ask for Victor Salinas; he’ll walk the site and write a quote for the duty cycle you actually run, not a generic one.
Need a gate installed or replaced in Farmers Branch? Call (903) 627-2906 now for a free estimate and a written price before any work starts. We serve the whole city, from Valley View Lane to Dennis Lane and everything between, and we answer the phone day or night.
Written by Victor Salinas, Owner of Ironworks Gate Co., serving Farmers Branch and the wider Dallas County area since 1984.