Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Garland
Gate repair in Garland usually comes down to one of two things: the clay soil under the post has moved, or the hardware has finally given out after decades of North Texas weather. We fix both. A typical hinge and post repair in Garland runs $225-$475, and most jobs are completed in a single visit. Ironworks Gate Co. has been setting posts, welding cracked steel, and rebuilding gates on Blackland Prairie clay for over 42 years, and we answer the phone 24 hours a day. Call (903) 627-2906 and you will speak to a person, not a recording.
Why Ironworks Gate Co. Is Garland’s Preferred Gate Repair Company
Garland homeowners know their gates face conditions that other DFW suburbs simply do not. The clay here moves. The posts heave. The hinges bind. We have seen it in Creekside Estates, in the established streets of Central Garland near Downtown, and along Naaman School Road where the subdivision build-out of the 1970s left thousands of gates sitting on shallow footings. That local knowledge means we check the post before we touch the hinge. A general handyman may realign your gate and call it done. Six months later, the clay shifts again and the same gate is dragging. We fix the post first, which is the only repair that lasts in Garland.
Our crews are background-checked and uniformed. They work the way they would in their own mother’s yard, and every job is covered by the 90-Day Done Right Promise in writing. No paperwork, no arguing. If it is not right, we come back. Our founder Victor Salinas built the company on that standard in 1984, and it has not changed since. Garland customers also take advantage of the standing offers: $50 off any repair over $250, a free second opinion on any written estimate, and a 5% senior and veteran discount, always.
Our Gate Repair Services in Garland
Hinge & Post Repair
This is the defining gate repair job in Garland. The Blackland Prairie clay expands during wet seasons and shrinks during drought, and that cycle slowly tilts gate posts out of plumb. In many established neighborhoods, the latch-side post has heaved 2 to 3 inches higher than the hinge side, leaving the gate with a visible diagonal sag. Locals call it a “walking gate.” We excavate the old post, pour a new 30-inch deep footing with a rebar cage, and reset everything square. In Garland, a hinge and post repair typically runs $250-$475 depending on gate size and post condition.
Gate Realignment
Realignment is the follow-on job to a post reset, or sometimes the repair of last resort when a homeowner has been battling a dragging gate for years. If your gate only latches when you lift it, the geometry is wrong. We check post differential first, then adjust hinges, latch plates, and the gate’s rack angle. Straightening the panel without fixing the post would just delay the next service call by one season. In Garland, we see this constantly after spring rains when saturated ground loosens footings. Most realignments run $180-$350.
Electric Gate Repair
Your operator arm may have cracked welds from the 2021 ice storm, or the control board may have failed after a series of hard freezes. Either way, a dead electric gate in Garland usually opens manually, but it should not have to. We are trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That depth means the correct fix happens on the first visit. Electric gate repair in Garland typically runs $240-$520, and the price is quoted and agreed before any work starts.
Weld & Rust Repair
North Texas alternating between summer heat and freezing temperatures is a punishing environment for welded steel gates. Weld cracks at the operator arm mount or at the hinge stile are common on gates installed in the 1980s and 1990s. Rust at post bases shortens the life of hinges and latches. We grind out the cracked weld, re-weld with proper penetration, and treat rusted steel with a corrotion inhibitor before repainting. Small crack repairs run $150-$300; post-base rust repair that requires material replacement runs $300-$650.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Garland
We service and repair all major gate-automation brands that Garland homeowners have had installed over the past two decades. That includes LiftMaster, the most common operator on residential driveway gates in Dallas County, plus FAAC and BFT, which appear frequently on the 1970s and 1980s estate properties in north Garland and along the Lake Ray Hubbard corridor. We keep common replacement parts for LiftMaster and Mighty Mule operators in our local service stock, so most Garland repairs get done on the first trip. If your operator is old enough to predate the 2021 freeze, it is worth having us inspect the weld points before the next storm season.
Common Gate Repair Problems We See in Garland Homes
- Clay heave on the hinge post. The hinge-side post tilts out of plumb as the clay below it expands and shrinks. The gate sags, the latch no longer lines up, and every attempt to adjust the hinges fails until the post is reset in concrete below the active clay zone.
- Saturated footings after heavy rain. Spring storms saturate the ground around shallow post footings, particularly on gates installed before the city’s current construction standards in the 1970s. The gate drops and binds on the latch side within days of the rain, not months later.
- Weld cracks from freeze-thaw cycling. The 2021 ice storm exposed thousands of weak welds on operator arms across Garland. Even operators that still work may have hairline cracks that will fail mid-travel, leaving the gate stuck during the next power cut. We check the arm and mount welds on every electric gate repair.
- UV and oxidation on steel hinges and latches. Garland summers regularly exceed 105°F, and the UV breaks down protective coatings on exposed steel hardware. Combined with occasional freezing temperatures, that oxidation cycle means steel hinges corrode faster here than in other DFW cities further from the lake humidity.
Pricing for Gate Repair in Garland, TX
Here are the ranges Garland homeowners can expect on a typical gate repair call. Minor hardware replacements like a latch or hinge run $120-$250. Hinge and post repair runs $250-$475 depending on post depth and concrete work. Gate realignment runs $180-$350. Electric gate repair runs $240-$520 depending on the operator brand and whether the failure is electrical or mechanical. Weld and rust repair runs $150-$650 depending on the extent of the rust and whether structural members need replacement. Every price is quoted and agreed in writing before a single bolt is turned. No surprises on the bill. We also offer an $89 seasonal tune-up that includes post check, hinge lubrication, operator arm inspection, and safety sensor testing. Call (903) 627-2906 for an exact quote.
We Also Serve Cities Near Garland
Our Garland crews also serve the surrounding communities. If you are in Sachse, Rowlett, Richardson, or Plano, our Gate Repair team covers those areas with the same response time and the same written 90-Day Done Right Promise. For Garland residents, visit our Gate Repair in Garland page for more local detail.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Garland
Because the Blackland Prairie clay under your gate’s posts has expanded with the moisture, and that expansion pushed one post upward. In Garland, we see this most often on gates from the 1970s and 1980s where the post was set in shallow concrete that has since cracked. The fix is not a hinge adjustment. The post needs to be excavated and reset in a deeper footing that reaches below the active clay zone, otherwise the same drag returns with the next wet season. Call (903) 627-2906 and we will check the post differential before anything else.
Every automatic gate operator has a manual release. On LiftMaster and FAAC operators, look for the release handle or keyed release on the operator arm or the motor housing. Pull the handle and the gate will swing freely by hand. If the gate feels heavy or binds when you push it, do not force it. A bent operator arm or a cracked weld from a prior freeze can make the manual operation dangerous and can damage the gear mechanism further. Call us at (903) 627-2906 and we will walk you through it or send a technician to Garland same day.
Hinges in Garland corrode because of the combination of UV, summer humidity, and the freeze-thaw cycle that traps moisture in the steel’s pores. The UV breaks down the factory coating during 105°F summers, then the winter freezes open micro-cracks in the steel itself. That oxidation cycle is faster here than in many other DFW suburbs, particularly in neighborhoods near Lake Ray Hubbard where humidity runs higher. We replace corroded hinges with powder-coated or galvanized hardware rated for North Texas conditions.
Usually yes in Garland, and that is the typical outcome. The sag on a gate that old is almost always a post problem, not a frame problem. The hinge-side post has tilted in the clay, or the latch-side post has heaved upward. We reset the posts, then realign the hinges and latch hardware. The wooden gate itself is often salvageable. If the wood has rotted at the hinge mounts, we can scarf in new wood or weld steel reinforcement plates to the frame. A full replacement is only necessary when the gate’s internal structure has rotted through.
For a standard residential gate post replacement on an existing fence line, Garland generally does not require a permit or inspection for the post or the gate itself. If the gate operator includes a new electrical run or a new driveway sensor loop, that portion of the work falls under the city’s electrical permitting rules and we handle the permit application on your behalf. Call (903) 627-2906 and we will confirm what applies to your specific property before we start.
What Garland Homeowners Should Know About Wind and Storm Damage
Garland sits in the wind corridor that runs east of Dallas, and solid infill gates catch that wind like a sail. A 6-foot wood privacy gate in full wind load pushes hundreds of pounds of lateral force into the hinge post. If that post has a shallow footing or the clay around it has already been weakened by drought shrinking, the gate will tear loose or the post will fail at the ground line. We see this after every severe thunderstorm and the occasional direct wind event that tracks through north Garland from Rowlett.
The repair sequence matters. A gate that blew loose is not simply re-hung. The post must be inspected for movement in the soil. The hinges must be checked for metal fatigue. If the gate is automatic, the operator arm must be checked for cracks and the safety photocells must be re-tested for proper alignment. Wind damage often reveals a post condition that was already failing silently. We fix the visible damage and the underlying soil problem in the same visit, so the next storm does not repeat the failure.
Storm Preparedness and Your Gate
Before a storm, put the gate in manual mode by pulling the manual release. That prevents the operator from trying to move a wind-loaded gate and bending the arm. If you have a keyed release, make sure the key is where you can find it in the dark. After the storm passes, check the gate for square, check the post for visible tilt or soil heave, and watch for a gate that closes with a shudder or a new sound. Those are early signs of a failing footing or a cracked weld. The faster we catch it, the less the repair costs. Call us at (903) 627-2906 and a live person will answer, 24 hours a day, 7 days a week.
Victory in the Creekside Estates Neighborhood
We remember the 1983 cedar swing gate in Creekside Estates off Naaman School Road. The homeowner called after a spring rain left the gate dragging heavily on the latch side. Our crew found the hinge post had cracked its shallow footing and the gate had dropped enough to bind. We excavated the post, poured a new 30-inch deep footing with a rebar cage, then realigned the hinges and repaired a LiftMaster LA400 operator arm that had been damaged during the 2021 ice storm. The gate now swings square and the safety photocells test clean at both full open and close. That is the standard Garland repair sequence: fix the post, then fix the hardware, then make it close square.
Call Ironworks Gate Co. for Gate Repair in Garland, TX
If your gate is dragging, sagging, or dead in Garland, we will come look at it. The estimate is free. The price is set in writing before any work begins. The repair is backed by the 90-Day Done Right Promise, in writing. Call (903) 627-2906 and a person will answer. Not a call center. Not a voicemail. A person who knows gates and knows Garland clay.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Garland with gate repair, hinge and post work, and electric gate service since 1984.