Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Farmers Branch
If you’re in Farmers Branch and your gate sags, sticks, or won’t close square, the fix usually comes down to a hinge, a post, or a weld. Most gate parts repairs in Farmers Branch run $180 to $650, depending on whether we’re rebuilding an original 1960s wrought-iron panel or replacing a burned-out commercial slide gate roller. We’re in Farmers Branch regularly, and our team can usually have a technician at your gate the same day you call. That’s the truth of it, and the number is (903) 627-2906.
Farmers Branch is a particular kind of place for gate work. The residential blocks from the 1950s through the 1970s are dense, the driveways are shared more often than people expect, and the commercial corridor along I-35E runs freight through slide gates all day and half the night. We’ve spent years working both sides of that divide, and we’ve learned which parts fail first in each.
Why Ironworks Gate Co. Is Farmers Branch’s Preferred Gate Parts & Welding Company
We’ve been handling Gate Installation - Farmers Branch and repairs for over 42 years, and the work we do in Farmers Branch draws on every one of those years. Victor Salinas leads our team, and he’s the first to say that a gate job in the ranch-style neighborhoods off Valley View Lane isn’t the same as a gate job in a new build in a neighboring city. The iron is older, the posts are set in reactive soil, and the clearances are tighter. Getting that right takes experience, not guesswork.
Our Farmers Branch customers call us because we answer the phone with a live person, 24 hours a day, and because the price we quote before work starts is the price on the bill when we’re done. Every job carries our 90-Day Done Right Promise in writing. If it isn’t right, we come back and make it right. No paperwork, no arguing. That’s the Keystone Standard on every single gate, from a hand-welded courtyard gate near Webb Chapel Road to a commercial slide gate operator on a loading dock off Stemmons Freeway.
We also stock the parts most commonly needed in Farmers Branch, because waiting on a shipped hinge or a specialty roller doesn’t help anyone. Our service technicians are trained and equipped on nine automation brands including LiftMaster, FAAC, and Mighty Mule, so Farmers Branch Gate Motor & Opener fixes are usually made on the first visit.
Our Gate Parts & Welding Services in Farmers Branch
Hinge Replacement
Hinges are the silent workhorses of every gate, and in Farmers Branch they fail in predictable ways. The black clay soil around the 1950s-era homes off Josey Lane shifts with every drought and rain cycle, and a hinge that was plumb ten years ago might now carry the panel’s entire weight at an ugly angle. We replace worn pintles, barrel hinges, and strap hinges with steel rated for exterior Texas weather, and we shim and re-square the panel so it doesn’t drag. A typical hinge replacement in Farmers Branch runs $180 to $340.
Post Replacement
This is the repair we do more than any other in Farmers Branch, and it’s the one most homeowners don’t see coming. A wrought-iron post set in Dallas County clay will, over 40 or 50 years, corrode at the soil line and begin to lean. When the post goes, the gate binds, the opener stalls, and the panel scrapes the driveway. We cut out the failed post, pour a deeper footing with rebar to resist future heave, and set a new post plumb and square. Post replacement in Farmers Branch typically runs $350 to $750, including concrete and finishing.
Rail Repair
Rails on ornamental swing gates in Farmers Branch take a beating from decades of opening cycles on hardware that was never upgraded. We straighten bowed top and bottom rails, reinforce cracked welds, and splice in new steel where corrosion has eaten through. For a gate with sentimental or architectural value, rail repair is nearly always the better call than replacement, and the cost usually lands between $220 and $500 depending on how much section must be rebuilt.
Custom Welding
Some gates in Farmers Branch can’t be bought from a catalog. They were hand-welded in 1962 to fit a courtyard in a mid-century ranch home, or they span a shared driveway where two properties meet and the pillar spacing isn’t standard. We fabricate and weld custom hinges, replacement pickets, reinforcing gussets, and entire gate frames in the field, with an eye toward matching the original ironwork’s material and scale. Custom welding jobs in Farmers Branch are quoted per task; most residential repairs land between $300 and $900, and we’ll walk you through the number before any work begins.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Farmers Branch
The gate openers on Farmers Branch homes and businesses run the full range of brands, and our technicians are certified to service nine of them: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We hold common repair parts for LiftMaster and FAAC openers in local service stock, which means a residential service call in Farmers Branch doesn’t stall while we wait on a bracket or a limit switch from a warehouse. Whether you have an original Gate Parts & Welding concern or a full operator replacement, we arrive equipped.
Common Gate Parts & Welding Problems We See in Farmers Branch Homes
- Black clay soil twisting swing gate posts out of square. The homes platted north of Valley View Lane and west of Josey Lane sit on some of Dallas County’s most reactive clay. A gate post shifts with the soil, and the panel starts scraping. When that binds badly, the opener motor stalls and burns out, which turns a $300 post job into an $800 motor replacement. We catch it at the post.
- Freight-heavy commercial slide gates on the I-35E corridor eating through rollers and rack and pinion sets. Truck traffic runs those gates dozens of cycles per hour. Roller wheels shear, limit switches fail from constant cycling, and rack teeth wear. A residential tech who sees ten cycles a day cannot keep up with that wear rate. We can.
- 1960s ornamental iron cracking at the welds after a hard freeze. The February 2021 freeze was unforgiving to older Farmer Branch ironwork. Welds that never failed in 50 years split after prolonged cold, and unheated operators seized. We inspect for cold-weather stress fractures and reweld before the panel separates.
- Shared driveway gates where pedestrian access has to stay open during repair. A lot of Farmers Branch side and rear courts are shared between neighbors. We stage the job so the pedestrian notch stays usable, or we install a temporary pedestrian panel while the main gate is on the bench. The mail still gets delivered, the kids still walk to school, and the work still gets done.
Pricing for Gate Parts & Welding in Farmers Branch, TX
We believe in speaking plainly about money. A hinge replacement in Farmers Branch typically runs $180 to $340. A post replacement usually lands between $350 and $750, depending on depth and access. Rail repairs run $220 to $500 on most residential gates, and custom welding jobs start around $300 and go up based on the scope. Commercial slide gate work along I-35E is quoted per job because the scale varies so much; a roller replacement might be $175, while a rack and pinion rebuild on a heavy freight gate can run $700 to $1,800.
Every price is quoted and agreed before we turn a single bolt. If you have a written estimate from another company, bring it to us and we’ll give you a free second opinion. And ask about the active offers: $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (903) 627-2906 for an exact number.
We Also Serve Cities Near Farmers Branch
If your home sits just over the city line, we cover Farmers Branch and the surrounding communities too. Our Gate Parts & Welding crews work regularly in Richardson, Addison, Garland, and Far North Dallas, and the same pricing, promise, and 24-hour live phone support apply across the whole area.
Serving Farmers Branch, TX - Our Local Coverage Area
We’re based in the Farmers Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Farmers Branch
That’s the black clay. In a dry North Texas summer, the soil under your gate posts shrinks and the posts lean outward, which pulls the gate out of square and makes it bind. After a good rain, the clay swells and the posts push back toward plumb, so the gate seems to fix itself. The real fix is deeper post footings and sometimes a hinge reset, because the seasonal cycle will keep wearing the same spot. Call (903) 627-2906 and we’ll tell you what your particular gate needs, free.
Yes. Shared driveways are common across older Farmers Branch, and we stage our work so pedestrian access stays open the whole time. If the main gate has to come off its hinges or posts, we set a temporary pedestrian panel so neighbors can still come and go. We tell you the plan before we start, and the access arrangement is part of the written quote.
We repair them, and we’d rather repair than replace. A 1960s wrought-iron gate in a Farmers Branch ranch home is usually better steel than anything made today, and the patina and proportions are part of the property’s character. We straighten rails, replace rotted posts, reweld cracked joints, and restore the original hardware where it can be saved. Replacement only comes when the panel is structurally gone, and we’ll tell you honestly either way.
Same day, in nearly all cases. We understand that a slide gate down on the I-35E corridor means backed-up trucks and lost time, so we prioritize commercial service calls in Farmers Branch. Our techs carry common slide gate parts, limit switches, and roller wheels in local stock, and most commercial slide gate failures are repaired on the first visit. Call the 24-hour line at (903) 627-2906 and a live person will answer.
Yes, it’s a safety problem. Photo-eyes and safety edges prevent a moving gate from striking a child, a pet, or a vehicle. Many automatic gates installed before the 2000s were wired without them, and adding a photo-eye is a straightforward job that should not be postponed. We can add Gate Access Control in Farmers Branch features like a UL-rated photo-eye and safety edge to your existing operator, usually during a single visit, and we’ll quote the cost before we start.
Get Your Farmers Branch Gate Fixed Today
If your gate sags, binds, or won’t close, don’t let it sit another season. The clay won’t stop moving and the rust won’t stop spreading, and a small hinge job is always cheaper than a full gate rebuild. Call Ironworks Gate Co. at (903) 627-2906 for a free estimate. Victor Salinas and our team serve Farmers Branch directly, with a live person on the phone 24 hours a day, upfront pricing, and a written 90-Day Done Right Promise on every job. We’ll be there when we say, and we’ll stand behind the work.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Farmers Branch and the surrounding Dallas-Fort Worth area since 1984.