A Ironworks company - serving Richardson, TX

Ghost Controls Keypad & Intercom Repair Nationwide

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators
Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Keypad & Intercom Repair: The Richardson Owner’s Guide

Ghost Controls keypad and intercom repair in Richardson typically runs $145 to $285 installed, and most failures are diagnosed and fixed the same day because we keep the common failure parts on the truck. Homeowners usually discover the problem the hard way: the keypad lights up but the gate won’t move, or the intercom buzzes but nobody can hear you on the other end. The good news is these are among the most straightforward Ghost Controls repairs we handle, and a live person answers our phone around the clock at (903) 627-2906.

Call (903) 627-2906

What surprises most Richardson owners is how often the keypad or intercom isn’t actually dead. It’s a corroded wire splice, a loose terminal, or a battery tray that’s given up after three Texas summers. Before you assume the whole unit needs replacing, call us. We tell you what it needs, we fix what we say we will, and we don’t disappear after the invoice.

Which Ghost Controls Models This Applies To

We service the full Ghost Controls line: the standard wired keypads, the wireless AXWK and AXDP models, and the intercom kits that pair with the AXP series opener boards. If your system was installed before 2015, you may have the older GCP series keypad, which uses a different wiring harness than the current production. That’s the most common compatibility gotcha we see: someone orders a new keypad online, then discovers the connector doesn’t match the board in the gate post.

For Ghost Controls specifically, we recommend OEM parts over aftermarket equivalents. The aftermarket keypads we’ve seen in Richardson tend to have softer faceplate plastic and weaker terminal screws, and on a gate that sits in direct Texas sun, that plastic warps within two years. The OEM units cost about $30 to $60 more, but they’re built for the same duty cycle as the opener they pair with. We stock both, and we’ll show you the difference before you decide.

Signs Your Ghost Controls Keypad & Intercom Repair Is Failing

  • Keypad backlight stays on but gate won’t respond: the keypad is getting power but the signal wire to the control board has corroded or come loose at the terminal block. Common after heavy rain or irrigation sprinkler coverage.
  • You have to press buttons multiple times before a number registers: the membrane contacts under the faceplate are wearing out. This is progressive; it will get worse. We see it most on keypads mounted facing west, where the afternoon heat bakes the faceplate in Richardson.
  • Intercom audio is faint, crackly, or one-directional: usually a failing speaker or a pinched wire where the cable enters the gate post. Sometimes it’s simply moisture in the housing; sometimes the mic has failed from age.
  • Keypad works intermittently after rain or humidity: the housing seal has degraded and condensation is bridging contacts inside. If you catch this early, the unit can often be dried, cleaned, and resealed rather than replaced.
  • The gate opens fine from the remote but never from the keypad: this points to a keypad-specific fault rather than an opener problem. The board is recognizing the command, but the keypad isn’t sending one. Could be the cable, could be the logic board in the keypad itself.

Replacement Cost & What’s Included

In Richardson, you should expect to pay between $145 and $285 for a Ghost Controls keypad or intercom repair, installed. That range covers everything from a wire splice and terminal cleanup at the low end to a full keypad replacement with a new OEM unit at the high end. We quote the price before any work begins, and that’s the price on the invoice. No surprises, no “unexpected complications” upcharges.

Every Ghost Controls keypad and intercom repair we complete is covered by our 90-Day Done Right Promise in writing. If it acts up within 90 days, we come back and make it right. No paperwork, no arguing. Victor Salinas has been doing gate work across the north Dallas corridor for nearly three decades, and he’s built the company on the idea that a repair should outlast the warranty by a long shot.

DIY or Call Us?

These repairs are not high-tension work. Nothing here will send a spring through your garage wall. But there is live low-voltage wiring involved, and Ghost Controls boards are not forgiving of crossed wires. If you short the wrong two terminals while poking around with a multimeter, you can turn a $150 keypad repair into a $600 board replacement.

What you can safely do: check the obvious. Is the keypad battery in good shape? Are the wire connections at the keypad tight? Is there standing water in the housing? Beyond that, call us. We’ll diagnose it over the phone in most cases, and if we need to come out, we will be there when we say. Call (903) 627-2906, and remember: a live person picks up.

How long do Ghost Controls keypads last in Texas?

A properly installed Ghost Controls keypad lasts 5 to 8 years in Richardson before the faceplate or contacts start showing age. The keypads are built for general outdoor use, but our summers push them harder than most climates. A unit that would last a decade in Ohio may start acting up at year six here. The intercom units tend to last a bit longer, 7 to 10 years, unless moisture gets into the housing.

Can a Ghost Controls keypad be repaired instead of replaced?

Yes, about half the time. If the problem is wiring, terminals, or housing seal failure, a repair is the right call and costs less. If the membrane contacts are worn or the logic board has failed, replacement is the honest answer. We’ll show you the failed part, explain what we found, and let you decide. Call (903) 627-2906 for an honest diagnosis.

How long does a keypad or intercom swap take?

Most Ghost Controls keypad and intercom repairs are completed in a single visit of 45 to 90 minutes. We arrive with the common replacement parts and testing equipment already on the truck, so we’re not making a second trip to a supply house. You’ll have a working keypad before your afternoon coffee goes cold.

Do you stock Ghost Controls parts in Richardson?

We stock the most common Ghost Controls keypads, intercom modules, wiring harnesses, and mounting hardware on our service vehicles. We also keep parts for LiftMaster, Mighty Mule, and DoorKing systems on hand, so if you have a second gate or a neighbor with a different opener, we can likely help them the same day too.

Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving Richardson and nearby areas.

Need Gate Repair help in Richardson? Licensed & insured · 30-60 min response · free estimates
Call (903) 627-2906
Local Service Coverage

Request a Free Estimate in Richardson

Tell us what you need - Ironworks Gate Co. responds fast. No obligation.

By sending this request, you acknowledge our Privacy Policy and agree that you may be contacted via phone, email, or SMS about your request, including by the independent professionals who may fulfill it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch