Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Highland Park
Gate access control in Highland Park means keypads, remotes, phone entry, card readers, and video intercoms on estate driveways where the gate itself is often custom ironwork from the 1920s or 1950s. Most access control repairs in Highland Park run $180-$650, and full system upgrades with a new operator and video intercom typically land between $1,400 and $3,800. Our crews know the setback rules, the shared driveway constraints, and the clay soils that make Highland Park gates behave differently than anywhere else in North Texas. Call (903) 627-2906 to schedule service.
Why Ironworks Gate Co. Is Highland Park’s Preferred Gate Access Control Company
Highland Park homeowners don’t call the first name they find. They call the company their neighbor used, the one that showed up on time and didn’t leave a mismatched actuator bracket bolted onto a 1930s cast iron gate. That’s how we’ve built our name across the Park Cities. Victor Salinas, who leads Ironworks Gate Co., has spent decades working on estate gates, and the technicians he sends to Highland Park are background-checked, uniformed, and trained on nine gate automation brands. They arrive knowing the difference between a gate on Armstrong Parkway and one on Beverly Drive, because the setback rules, the driveway lengths, and the ironwork standards are not the same as Dallas. Every job is backed by our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
We’re not a generalist handyman service. Gate access control is all we do, and in Highland Park that focus matters. A live person answers our phone 24 hours a day, 7 days a week, so when a keypad stops working at 7 a.m. on a school morning, you don’t get a voicemail tree. You get a person who can dispatch a technician to your street.
Our Gate Access Control Services in Highland Park
Keypad Entry
Keypad entry is the most requested access control service in Highland Park, because so many estates rely on a pedestal or gooseneck keypad for daily comings and goings. We install, repair, and reprogram wired and wireless keypads, including models that tie into LiftMaster and FAAC operators. On older Highland Park properties, the original keypad conduit was often run through the same trench as the driveway lighting, and when that conduit cracks under clay movement, the keypad wiring shorts. We trace it, repair it, and get the keypad talking to the operator again.
Video Intercom
Video intercoms have become a standard upgrade on Highland Park streets where long driveways put the gate 150 to 300 feet from the front door. A wired video intercom lets you see and speak with whoever is at the gate before you let them in. We install systems that work with your existing gate operator, whether the gate is a swing on Armstrong Parkway or a slide on a shared driveway off Preston Road. The video feed can route to an in-home monitor or to your phone.
Phone Entry
Phone entry uses your cell phone as the credential. A visitor at the gate presses a button and the system calls your phone. You talk to them, then press a key to open the gate from anywhere. For Highland Park homeowners who split time between homes or travel, this is the most practical improvement we make. The system taps into the existing cellular network, not your home Wi-Fi, so it keeps working when the Wi-Fi goes down.
Card Reader
Card readers are common on Highland Park estates with staff, landscapers, or regular vendors who need gate access without sharing a keypad code. A card reader mounts at the driver’s window height and works with proximity cards or fobs. When a card is lost, you delete that credential in about a minute instead of changing everyone’s code. For shared driveways, this is often the cleanest solution, because each household keeps its own set of cards and nobody has to remember a shared code.
Smart Access
Smart access ties the gate into an app on your phone. You get a push notification every time the gate opens, you can open or close it from anywhere, and you can create temporary access for a delivery driver or a houseguest that expires on its own. On Highland Park properties with original iron gates, smart access is usually a motor-and-control-board upgrade that works with the existing metal, not a modification to the ironwork itself.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Highland Park
Ironworks Gate Co. is trained and equipped on nine gate-automation brands, but in Highland Park we see three more than any others: LiftMaster, FAAC, and BFT. These are the operators most often spec’d on estate gates that were automated in the last 15 to 25 years, and we service all three at the board level. That matters because a control board failure doesn’t always mean a full operator replacement. We diagnose the exact fault, quote the repair or replacement before any work starts, and stock common LiftMaster and FAAC parts so a Highland Park repair doesn’t stall for a week waiting on freight. Whatever brand is on your driveway, our Gate Access Control team works with it.
Common Gate Access Control Problems We See in Highland Park Homes
- Photo-eye nuisance stops from clay soil movement. The black clay under Highland Park swells in spring and contracts in the August drought. When a gate post tilts even an eighth of an inch, the photo-eye beam breaks and the gate reverses or refuses to close. We realign the post or reset the photo-eye and get the gate closing cleanly again.
- Shared driveway credential conflicts. On shared driveways where two homes use one gate, one household changes a code or deletes a credential, and the neighbor’s remote or phone entry stops working. We reprogram the system so both households keep working without either losing access during the service call.
- Heavy original iron gates tripping the operator’s torque limit. The 1920s-to-1950s cast iron gates we see on Beverly Drive and Lakeside Drive weigh far more than modern operators are rated for when the frame has sagged. The keypad code is correct. The card is valid. But the operator refuses the command because it’s fighting the gate’s weight. We address the sagging frame and the operator torque settings together, not one or the other.
- Conduit cracking under old driveways. Original access control wiring on older Highland Park estates often runs through steel conduit laid in the 1960s or earlier. Clay movement cracks the conduit, water gets in, and the keypad or intercom starts working intermittently. We run new low-voltage cable where possible and splice only when the driveway routing makes a new run impractical.
Pricing for Gate Access Control in Highland Park, TX
Gate access control pricing in Highland Park runs a little higher than in surrounding cities, because the equipment spec is higher and the site constraints are tighter. Here’s what we typically see:
- Keypad replacement, standard wired: $180-$350 for most models; gooseneck pedestal keypads run $380-$550.
- Remote control or phone entry system: $150-$400 depending on receiver and quantity of remotes.
- Card reader with 5 cards: $350-$650 installed.
- Video intercom wired to the house: $750-$1,400; wireless-to-phone systems start around $600.
- Smart access upgrade with app control: $550-$1,100 depending on operator compatibility.
Every price is quoted and agreed before any work starts. You know the number before we turn a single bolt. Estimates are free, and we’re happy to take a second look at any written estimate from another company. If you have a quote in hand, call us. We’ll tell you honestly whether it’s fair.
We Also Serve Cities Near Highland Park
While this page is written for Gate Access Control in Highland Park, our crews also schedule service in Richardson, Addison, Garland, and Far North Dallas. If your property is in one of those cities, call (903) 627-2906 and we’ll get you on the schedule.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Highland Park
Highland Park operates under its own municipal authority separate from Dallas, and yes, adding automation components like a video intercom, keypad, or card reader to a gate that touches a right-of-way can trigger permit and setback review that Dallas properties don’t face. The specific requirement depends on where your gate sits relative to the property line and the right-of-way. Our team works with Highland Park’s code requirements on a weekly basis, so we’ll tell you during the estimate whether a variance is needed and handle the paperwork. Call (903) 627-2906 and we’ll walk the site for you.
Yes, and we’ve done it on shared driveways off Preston Road more times than we can count. On a shared driveway, both homes depend on the gate, so we stage the new operator, control board, and keypad components inside the gate recess and swap everything in stages. The gate may sit in manual open position for part of the day while we complete the install, but the driveway stays usable for both households. We schedule that portion of the work between the typical school and work traffic windows.
In most Highland Park cases we see, the code isn’t the problem. The clay soil contracts in the August drought, the gate post settles an eighth of an inch, and the photo-eye beam breaks or the operator’s limit sensor trips. The gate refuses the keypad command even though the credential is valid. We check the post, the photo-eye alignment, and the operator limits before we ever reprogram a keypad.
No. Card readers and phone entry systems mount on the gate post, the gate recess, or a nearby pedestal. The original ironwork stays exactly as it is. On Highland Park estates with one-of-a-kind cast panels and crests, we’re not going to drill into that metal unless there is absolutely no other option, and we always discuss the mounting plan with you first.
Yes. A properly configured smart access or card reader system assigns credentials per household. You see your own entry log. The neighbor sees theirs. A delivery driver gets a temporary code that works once and expires. No shared codes, no single log for both houses. We configure this at the board level so both sides of a shared driveway get clean separation.
Call Ironworks Gate Co. for Gate Access Control in Highland Park
If your Highland Park gate keypad is dead, your remote stopped working, or you want video intercom and smart access added to an original estate gate, call (903) 627-2906. A live person answers, 24 hours a day. We’ll schedule an estimate, quote a firm price before any work begins, and stand behind the job with our written 90-Day Done Right Promise. You can also mention our standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call today.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Highland Park with gate access control, repair, and installation.